Skip to main content

Mazys Marketing Corporation

Knowing how to wash comforters and blankets properly can turn bulky items into one of your laundry shop’s best add-on services. Customers would rather pay a shop than struggle with a heavy, wet comforter at home. But comforters are also the items most likely to come back with complaints: still damp inside, lumpy filling or that musty kulob smell.

This guide covers how to wash comforters, blankets and other bulky items step by step, how to dry them completely, and how to price them so the extra time and machine use pay off.

Why comforters and blankets need special handling

  • They are bulky. A comforter fills most of a washer drum and needs space to move so water and detergent reach every layer.
  • They hold a lot of water. The filling soaks up water and takes much longer to dry than a regular load.
  • Damp filling smells. If the center stays damp, it develops kulob smell within hours of folding.
  • Filling can clump. Polyester, cotton and down fillings can bunch up if they are washed or dried the wrong way.

Before you wash: check these first

  1. Read the care label. Check the water temperature, whether it can be machine washed and tumble dried, and any “dry clean only” warnings. If there is no label, ask the customer what the filling is.
  2. Inspect for damage and stains. Look for tears, loose seams and stains. Point them out to the customer at drop-off and note them on the claim slip.
  3. Check the size against your machine. The comforter should fit loosely with room to move. Overloading leaves soap inside the filling and puts strain on your machine.
  4. Wash one comforter per load. Do not mix comforters with regular clothes or other bulky items.

How to wash comforters step by step

  1. Pre-treat stains. Apply a little Ariel Power Liquid or Tide Power Liquid directly on stains and let it sit before washing. See our stain removal guide for specific stains.
  2. Load it evenly. Spread the comforter loosely around the drum so the machine stays balanced.
  3. Use liquid detergent at the dose on the pack. Liquid dissolves fully, so it is less likely to leave residue inside thick filling. Do not add extra detergent: it is hard to rinse out of bulky items.
  4. Choose a gentle or bulky cycle. Use the water temperature on the care label.
  5. Add an extra rinse. A second rinse removes leftover detergent from the filling.
  6. Add fabric conditioner in the final rinse. Downy leaves comforters soft and fresh-smelling. For down and feather fillings, check the label first, since many manufacturers advise skipping fabric conditioner.

How to dry comforters without kulob smell

Drying is where most comforter complaints start. A comforter that feels dry outside can still be damp in the middle.

  • Dry on low to medium heat. High heat can damage the cover and clump synthetic filling.
  • Add dryer balls or clean tennis balls. They bounce around the drum and help fluff the filling.
  • Stop and redistribute halfway. Shake out the comforter and turn it so damp sections are exposed.
  • Check the center before folding. Squeeze the thickest parts. If any part feels cool or damp, keep drying.
  • Never bag or fold it damp. Let it cool fully before folding. Our guide on how to remove kulob smell in clothes explains why.

Washing blankets, curtains and pillows

ItemWashing tipDrying tip
Blankets and throwsWash one or two at a time with room to move. Use a gentle cycle for fleece and knit blankets.Low heat. Fleece dries quickly, so check it early.
CurtainsRemove hooks and rings first. Wash on gentle and do not overload.Low heat or hang to finish so they do not wrinkle.
PillowsCheck the label. Wash two at a time to keep the drum balanced.Low heat with dryer balls. Make sure the center is fully dry.
Mattress protectorsFollow the label, especially for waterproof backings.Many need low heat or air drying. Check the label.

How to price comforter and blanket washing

Bulky items take more machine time, more detergent and much longer drying than a regular load, so most shops price them per piece instead of per kilo.

  • Price by size. Set separate rates for single, double, queen and king comforters.
  • Count the full machine time. One comforter can occupy a washer and dryer as long as two or three regular loads.
  • Charge for express service. Same-day comforter cleaning ties up your machines, so price it as a premium add-on.
  • Know your cost per load first. Our laundry shop pricing guide shows how to compute it.

Comforter cleaning is also a good seasonal promo. Many customers want fresh bedding before the holidays or after the rainy season.

Stock up on supplies for bulky items

Mazy’s Marketing Corporation is an official P&G distributor in the Philippines since 2014. We supply Ariel and Tide liquid detergent and Downy fabric conditioner in case packs sized for laundry shops, from branches in Metro Manila, Laguna, Pampanga and Cebu. Request a quote or find your nearest branch.

Message your nearest Mazy’s branch on Viber

Get current case prices and stock from the team in your area. It’s the fastest way to reach us.

Metro Manila: ElanLaguna: SherylPampanga: JocelCebu: Cristine

Frequently asked questions

Can I wash a comforter in a regular washing machine?

Yes, if the care label allows machine washing and the comforter fits loosely with room to move. If it fills the drum tightly, use a larger commercial machine so it rinses and spins properly.

How long does a comforter take to dry?

Much longer than a regular load, because the filling holds a lot of water. Dry on low to medium heat, redistribute it halfway and check that the center is completely dry before folding.

Should I use fabric conditioner on comforters?

For most cotton and polyester comforters, yes. Add it in the final rinse for softness and a fresh scent. For down and feather fillings, check the care label, since many manufacturers advise skipping it.

How should a laundry shop charge for comforters?

Most shops charge per piece based on size, because comforters use more machine time, detergent and drying than a regular load. Compute your cost per load first, then set rates that cover the extra time.

Leave a Reply

Your email address will not be published. Required fields are marked *